| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Suspension | Section: Rear Suspension | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003F6H000X |
| Title: REAR SUSPENSION: REAR LOWER ARM (for No. 2 Arm): INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. TEMPORARILY INSTALL NO. 2 REAR SUSPENSION ARM ASSEMBLY LH
(a) Align the matchmarks on the No. 2 rear suspension arm and adjust cam.
(b) Temporarily install the No. 2 rear suspension arm with the bolt and nut.
|
(c) Install the No. 2 rear suspension arm to the rear axle with a new nut. Torque: 130 N·m (1326 kgf·cm, 96 ft·lbf) |
(d) Install a new cotter pin.
2. INSTALL REAR COIL SPRING LH
3. INSTALL REAR PNEUMATIC CYLINDER ASSEMBLY LH (w/ Air Suspension)
4. STABILIZE SUSPENSION
5. TIGHTEN NO. 2 REAR SUSPENSION ARM ASSEMBLY LH
(a) Tighten the bolt and nut.
Torque: 120 N·m (1224 kgf·cm, 89 ft·lbf)
6. INSPECT AND ADJUST REAR WHEEL ALIGNMENT
|
|